亚洲三区在线观看无套内射,日韩欧美电影91网,这里有国产视频,超级碰不卡视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

stainless steel cylinder Sold to Estonia

Release time:2023-11-12 15:32:35 Hits: Current position: Home > News

This article mainly introduces:

Estonia hydraulic cylinder,stainless steel cylinder manufacturer,stainless steel cylinder

Estonia stainless steel cylinder

(Estonia stainless steel cylinder,produced by Hengyu Hydraulic Co., Ltd)

stainless steel cylinder are widely used in Estonia,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed stainless steel cylinder for customers from Estonia.

Introduction to stainless steel cylinder:

The commonly used buffer structure of the stainless steel cylinder is composed of a piston boss and a stainless steel cylinder head groove. When the piston moves close to the stainless steel cylinder head, it gradually enters the groove, and the oil in the groove is extruded through the gap between the boss and the groove, which increases the oil return resistance, produces the braking effect and realizes the buffer. Generally, a buffer mechanism should be used when the pressure is above 10MP.

The stainless steel cylinder is mainly composed of body, piston, piston rod, stainless steel cylinder head, stainless steel cylinder bottom, piston rod head and related auxiliary devices. The piston divides the stainless steel cylinder into two chambers, and moves reciprocally in the stainless steel cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the stainless steel cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the stainless steel cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the stainless steel cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the stainless steel cylinder bottom and the stainless steel cylinder head is serious, so the buffer deceleration should be set at both ends of the stainless steel cylinder The working medium of the stainless steel cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; stainless steel cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the stainless steel cylinder: The buffer structure of the stainless steel cylinder is to prevent the piston from colliding with the stainless steel cylinder head at the end of the stroke.

The piston rod and guide sleeve function of the stainless steel cylinder is crucial: the relative motion pair between the piston rod and the guide sleeve is the main factor causing external leakage, if the chrome layer on the surface of the piston rod is spalling or producing longitudinal tensile marks due to wear, it will directly lead to the failure of the seal.

The stainless steel cylinder is not the same as the stainless steel cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the stainless steel cylinder can not be used as a high-power power component, but the stainless steel cylinder can be used as a relatively large power component, or the stainless steel cylinder system can be used.

Answers to some questions about stainless steel cylinder:

How big gear pump need to use for 60*100 cylinder?
One cylinder size alone does not determine the size of the pump used. Choose the size of the pump, at least to know 1, the size of the load is how much, by the size of the load and the size of the cylinder and other conditions can be calculated the pressure required by the hydraulic system. 2. Speed of operation. From this speed and cylinder size, the required flow rate of the system is calculated. The relevant parameters of the pump can be selected by the pressure and flow rate to determine what kind of pump is required.

What is the reason why the hydraulic cylinder is not good at lifting?
There may be several situations 1, whether the slow one is worn 2, whether there is air in the slow cylinder 3, if the two cylinders are supplied by the same oil port, whether the slow joint is blocked (some processing residue will reach a certain oil port under a certain coincidence condition, This situation will not happen if it is not necessarily good before) 4, the oil seal in the slow cylinder leaks, causing the feed oil to leak from the return oil end. Point 4 is most likely because it is invisible and a technical failure. If it is a dual oil feed (separate oil feed), it is also necessary to check the oil supply system and the oil return system (valve type).

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
国产精品日乱网站| 國產精品中文字幕久久| 深夜福利免费在线视频| 亚洲国产精品97久久无色无| 欧美精品久久久久久乱码韩国| 国产一区二区三区久久女人| 自拍89区视频| 国产精品美女视频水多| 日韩中文字幕高清一二三四区| 中文字墓久久精品| 黄色在线99| 精品一区二区三区免费播放| 熟女性感精品一区二区| 亚洲欧洲中文日韩av乱码,| 日韩精品在线观看久久久| 一起操天天综合网| 不卡Av免费看| 国产一区无码免费在线看| 人人澡人人爽人人妻欧美一区二区| 精彩视频一区二区| 2019中文无码a| 粉嫩牛牛精品一区二区| 国产亚洲综合性久久影视| 欧美激情亚洲一区二区| caoporn超碰蜜臀| 国产白嫩美女高潮一区二区| 嗯嗯啊啊骚| 激情无码人妻又粗又大欧美视频| 黄片91......33?| 成人中文字幕av社区免费观看| 国产不卡AV手机观看| 91一区二区三区视频| 激情擦逼无码视频| 丝袜美腿九哥人妻一区二区三区四区| 久久久久69精品成人| 精品一区二区三区四区网站| 亚洲按摩中文字幕女同| 欧州AV剧| 精品日韩在线观看欧美曰本高| 最新com久| 色咪咪视频|