亚洲三区在线观看无套内射,日韩欧美电影91网,这里有国产视频,超级碰不卡视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

rack cylinder Sold to Angola

Release time:2023-11-13 11:19:26 Hits: Current position: Home > News

This article mainly introduces:

Angola hydraulic cylinder,rack cylinder manufacturer,rack cylinder

Angola rack cylinder

(Angola rack cylinder,produced by Hengyu Group)

rack cylinder are widely used in Angola,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed rack cylinder for customers from Angola.

Introduction to rack cylinder:

The advantages and disadvantages of the rack cylinder: the surface of the rack cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the rack cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

How the cavitation of the rack cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the rack cylinder, resulting in corrosive damage to the parts.

Answers to some questions about rack cylinder:

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.

What is the reason for the hydraulic cylinder sticking out and not retracting?
There are two reasons: First, the problem with the seal, if there are two seals on the piston, the top seal is broken. Second, when the hydraulic pressure itself is designed, the rod cavity area is too small, so that the desired return force can not be achieved during the return trip. You can first check whether the coupling is damaged; Then see if the relief valve in the oil line block is blocked. If the use time is too long, it needs to be cleaned, the hydraulic oil is very dirty and can block oil block. Electromagnetic directional valves can also be checked, but the chance of problems is relatively small, unless there is a product problem.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
中文字幕AV一区二区三区三电影卡| 亚洲欧美精品不卡| 美女午夜销魂视频| 久久日本无码一区| 人妻诱惑99| 亚洲综合一区图| 精品国产区一区二区| 中文字幕人妻精品| 人妻淑女二区| 丝袜人妻脚交舔| 色就是色欧美一区| Av一区二区黄片| 欧美激情精品成人| 亚洲国产一二三四区伦理电影TV| 极品少妇诱惑成人网站| www.老男av.com| 精品久久久久久中文字幕无码百度| 一区二区三区久久久| 玖玖玫一区二区| 男人av天堂日韩一区二三区| 日本nv一区二区在线视频| 国产精品久久久久久青青草| 欧美日韩国产不卡在线| 人妻熟中文字幕| 国产伦精品一区17免费| 日本黄色亚洲欧| 天天干天天射2018| com.好吊色| 亭亭五月丁香网| 日韩亚洲不卡中文字幕在线播放| 乱色亚洲四区| 欧美精射一区二区三区| www.二区福利| 在线视频H观看| 中国AV毛片网址| 日韩欧美夜夜情| 国产成人一级影片| 久久蜜桃男人| A级免费毛片网站| 黄色免费视频小说| 日本伦理片网站久久久久久|