亚洲三区在线观看无套内射,日韩欧美电影91网,这里有国产视频,超级碰不卡视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

steel mill cylinder Sold to Tunisia

Release time:2023-11-18 17:15:22 Hits: Current position: Home > News

This article mainly introduces:

Tunisia hydraulic cylinder,steel mill cylinder manufacturer,steel mill cylinder

Tunisia steel mill cylinder

(Tunisia steel mill cylinder,produced by Hengyu Group)

steel mill cylinder are widely used in Tunisia,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed steel mill cylinder for customers from Tunisia.

Introduction to steel mill cylinder:

The steel mill cylinder should be vented: when the steel mill cylinder is installed or parked for a long time to work again, the air will penetrate into the steel mill cylinder and the pipeline system. In order to prevent the abnormal phenomenon of crawling, noise and heating of the actuator, the air in the steel mill cylinder and the system should be discharged. In order to facilitate the removal of air deposited in the steel mill cylinder, the oil is best entered and discharged from the highest point of the steel mill cylinder. steel mill cylinders that require higher motion stability are often equipped with exhaust plugs at both ends. Before working, unscrew the exhaust plug to make the piston go back and forth several times without load in the whole stroke, and the air can be discharged through the exhaust plug. After the air is drained, tighten the exhaust plug before working.

The pressure, temperature, medium and speed of different types of seals are not the same, water-ethylene glycol medium (HFC) can not be sealed with polyurethane, it can only use rubber seal; When the steel mill cylinder is running fast, it must be sealed with slip ring, such as Sterseal, Glairing, GD1000K, TDI, etc., when the running speed is slow, Yx, U, V combination seals can be used; Fluorine rubber seal is used in high temperature and high pressure environment; When the running speed is fast, the buffer sleeve and buffer valve must be considered.

steel mill cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

The steel mill cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

Answers to some questions about steel mill cylinder:

Does the abbreviation bc stand for bucket cylinder or boom cylinder?
Hydraulic excavator hydraulic cylinder includes boom cylinder, bucket rod cylinder and bucket cylinder three parts, four cylinders. Because of the different naming conventions of major manufacturers, the meaning of BC is also different, for the sake of insurance, you need to consult the manufacturer.

What is the meaning of cylinder HSGK01-100/70E-4111-1320?
hsg Double acting single piston rod hydraulic cylinder and front end cover are connected by internal clamp key 01 Design serial number 100 cylinder inner diameter 70 piston rod outer diameter e Pressure class code 16mpa4111 Front flange, rod end external thread, both ends with buffer, oil port connection is internal thread 1320 stroke.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
国产最新91麻豆中文字幕| 成人无码在线播放| 欧美国产丝袜综合| 国产aⅴ一级香蕉| 在线自偷自拍| 亚洲成人网站免费在线观看| 偷拍自拍 亚韩 欧美 视频| 亚洲 欧美 国产 图片 二区| 久久精品国产亚洲免费| 啊啊啊好舒服啊啊视频| 搞B视频在线观看免费观看的| 日韩久久久无码破解二区| 婷婷福利在线| 少妇 内射 在线| 欧美精品2页| 亚洲无码官网| 精品人妻欧美一区二区| 美女福利视频在线网站| 欢观看麻豆AV| 麻豆嫖娼av| 天天干网| 欧美视频国产在线观看| 美女黄网站Av| 99久久综合国产二区高清| 日本美女午夜福利在线| 91精品视频精品| av:不卡在线看| 婷婷少妇综合| 午夜理伦视频| 欧美一级免费的大香蕉视频 | 精品99久久人人婷婷五月天| 亚洲日韩欧美小说综合| 99久久中文字字幕三级| 欧美乱子伦草泥马| 欧美精品,国产第六页| 日韩精品一区二区三区刘玥| 人人妻人人爱人人爽| 大香蕉伊人日本| 精品日韩美女久久久| 亚洲精品九九蜜臀| 日本无玛一区二区|