亚洲三区在线观看无套内射,日韩欧美电影91网,这里有国产视频,超级碰不卡视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

roller press hydraulic cylinder Sold to Sri Lanka

Release time:2023-12-09 16:24:24 Hits: Current position: Home > News

This article mainly introduces:

Sri Lanka hydraulic cylinder,roller press hydraulic cylinder manufacturer,roller press hydraulic cylinder

Sri Lanka roller press hydraulic cylinder

(Sri Lanka roller press hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd)

roller press hydraulic cylinder are widely used in Sri Lanka,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed roller press hydraulic cylinder for customers from Sri Lanka.

Introduction to roller press hydraulic cylinder:

The viscosity of the working oil used in the roller press hydraulic cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

The roller press hydraulic cylinder is mainly composed of body, piston, piston rod, roller press hydraulic cylinder head, roller press hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the roller press hydraulic cylinder into two chambers, and moves reciprocally in the roller press hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the roller press hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the roller press hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the roller press hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the roller press hydraulic cylinder bottom and the roller press hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the roller press hydraulic cylinder The working medium of the roller press hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; roller press hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the roller press hydraulic cylinder: The buffer structure of the roller press hydraulic cylinder is to prevent the piston from colliding with the roller press hydraulic cylinder head at the end of the stroke.

When the roller press hydraulic cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the roller press hydraulic cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

The roller press hydraulic cylinder should be used as far as possible to avoid the transverse force, sometimes the piston rod to bear the transverse load is too large, especially do not force or pull the roller press hydraulic cylinder, bite. Elimination method: When installing the roller press hydraulic cylinder, ensure that the axis position of the roller press hydraulic cylinder is consistent with the direction of movement; Make the load borne by the roller press hydraulic cylinder as far as possible through the roller press hydraulic cylinder axis, to avoid the phenomenon of eccentricity.

Answers to some questions about roller press hydraulic cylinder:

When the superimposed hydraulic control valve is added to the bottom of a solenoid valve and a double directional throttle valve, why does the cylinder shock on the return trip?
The stack hydraulic control check valve must be added above the stack one-way throttle valve.

What diameter cylinder is needed for a force of 5 tons?
It depends on the pressure of your system pump. If the normal working pressure of the system is about 8MPa, then the diameter of the cylinder should be 100 mm.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
亚洲Av伦理片一级二级在线| 麻豆精品夜夜水水| 超碰国产caoporn| 亚洲色影院丝袜| 欧美精品又粗又长XXXX一区二区| 国产一区精品白浆| 91精品麻豆久久久| 透B网站在线免费观看| 麻麻小穴AV| 色婷婷在线视频中文字幕| 国产一区色呦呦精品| 男人av资源中文字幕| 日韩一级精品一区二区| 五日AV一区二区| 欧美日一级视频| 国产精品大神在线| 欧美丝袜人妻综合| 美女黄页网址| 久久综合蜜桃东京热婷婷| 不卡一区二区福利视频| 中文字幕在线2019| 后入内射精品一区二区| 无码人妻中文字幕91| 亚洲一区二区三区成人久| 女同一二三区| 欧美香蕉视| 亚洲成人手机无码在线| 欧美美女被插小穴| 超碰人妻2222| 一练欧美黄片| 中日韩在线高清不卡123区| 欧美精品一区资源在线不卡在线| 日韩在线图片一区二区三区| 午夜精品一区二区三区三区无码| 国产又粗又大一区二区三区日韩精品| 天天色天天干干| 亚洲AV1区二区三区四区| 日本午夜三级视频| 女厕一区二区三区最新消息| 四房婷婷激情五月天| 亚洲。欧洲在线色情视频|