亚洲三区在线观看无套内射,日韩欧美电影91网,这里有国产视频,超级碰不卡视频

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

reciprocating cylinder Sold to Bahrain

Release time:2023-12-18 10:57:25 Hits: Current position: Home > News

This article mainly introduces:

Bahrain hydraulic cylinder,reciprocating cylinder manufacturer,reciprocating cylinder

Bahrain reciprocating cylinder

(Bahrain reciprocating cylinder,produced by Hengyu Group)

reciprocating cylinder are widely used in Bahrain,because of excellent temperature resistance,no transmission clearance,powerful torque.So our company has designed reciprocating cylinder for customers from Bahrain.

Introduction to reciprocating cylinder:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

When the reciprocating cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the reciprocating cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil reciprocating cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical reciprocating cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the reciprocating cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

Before purchasing the reciprocating cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

In order to ensure the service life of the reciprocating cylinder, the hydraulic system must be set up effective filtration to prevent pollution, the cleanliness of the oil should meet the ISO4406 standard, and the quality of the filtration should also meet the corresponding standards in ISO. The grade requirements of the filter are performed according to the actual working conditions of the system, but the minimum requirements are not less than 19/15 in ISO4406, that is, 24μ (β10≥75) in ISO4572.

Answers to some questions about reciprocating cylinder:

To achieve the same stroke, which is better, hydraulic cylinder or lead screw?
If there is batch action, then the hydraulic pressure is better. Hydraulic: smooth operation, no lubrication, easy control, high control accuracy (can use proportional or servo system), the key is to manually control, but certainly to support the hydraulic system, for a single action must cost. Maintenance costs are also high. Lead screw: simple structure, easy to achieve, convenient maintenance, but must be lubricated, can not be manual, or manual control is inconvenient. See where it is used, if it is used in high-precision occasions, it must only be hydraulic, because the lead screw has a gap. There are many hydraulic actions, the hydraulic system itself must be prepared, then the use of hydraulic pressure is also very economical.

Why is a light cylinder less productive than a heavy cylinder at the same oil pressure?
f=ps Under the same pressure, the larger the area, the greater the output, but the maximum pressure can not exceed the system engineering pressure of the cylinder!

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
精品自拍四区| 日韩三级激情欧美在线| 久久九九久精品国产| 久久黄片大全| 日韩 欧美 一区 二| 抽插网站| 日本,韩国,欧美,九九日| 成人A V一| 中文久久久久久久999| 天天干天天日天天强奸| 轻轻草国产精品无码| 免费国产一级黄片| 熟女人妻 在线 欧美| 0755午夜福利视频| 欧美porn成人无码| 在线观看一区二区三区免费| 中文字幕日韩欧美AAA| 欧美综合图片区揄拍| 伊人大香蕉AV在线播放| 日本精品一区二区三区伦理电影| 欧美日韩国产高清精品不卡| 久久电影天堂无码电影| 最新国产久热| 久久久夜夜夜视频| 婷婷一区久久| 99性视频| 欧美日韩 99| 我想草B短视频| 午夜诱惑福利在线看| 夫妻a级一级性生活毛片在线观看 欧美一区二区三区久久久精品 | AV婷婷一区二区三区三州| 女女同性女一区二区三区在线| p p美女av.| 国产精品人妻久久久久厨房 | 亚洲字幕九九| 99国产福久久久久久免费操 | 黄香蕉 成人网站| 国产伦理一区二区| 99日韩亚洲欧美一区| 日韩五月婷婷激情中文字幕| 自拍偷拍 国产精品|